Err

Faire revivre ces objets du passé
FrUk
Boutique
Votre Panier

.36''

Non lethal shooting kit for .36'black powder percussion revolvers

68,00 EUR
(-13,24%) 59,00 EUR
Détails Acheter
Non lethal shooting kit for .36'black powder percussion revolvers

New version allowing a very comfortable setting up and ejection of the primers.

Inside  or outside shooting system with rubber bullets.
Thanks to a .22" / 6mm Flobert blank cartridge ( 22 acorn) , the bullet reachs a velocity  of   190 m- 623 fts / sec.
Rubber bullets can be used about a hundred times.

The shooting noise is comparable to a powerfull airgun noise, so it allows  to shoot without disturb the neighborhood.
It's  also possible to use those bullets with a little bit of black powder or a piece of H&C's combustible enveloppe cartridge.

Instruction of use here

 Fits on :
-Pietta, ( Remington, Colt, Le Mat ) every years of construction. 
-Hege and  Uberti  ( but Walker et Dragoon )  made untill 1980. (See below how to know the year of manufacture of your Italian replica)
-Rogers & Spencer  made by  Euroarms et Pedersoli ...
Carefull : this kit may not be suitable for "five shots pocket revolvers" which have sometimes too small nipple drilling !



NOTE: Can't be shipped with 22'' crimped blank  "primers" by airway or out of  European Union.

The kits delivered in the out of European Union  countries will come without primer but with 12 bullets instead of 6.

In the USA or Canada, 22'' crimped blank can be bought at a good price there:
https://www.airgundepot.com/6mm-crimped-blanks-100-qty.html




H&C.22'' Nipples thread : M 6 x 0.75

Non lethal shooting kit for .36''black powder percussion revolvers

68,00 EUR
(-13,24%) 59,00 EUR
Détails Acheter
Non lethal shooting kit for .36''black powder percussion revolvers


Out of stock for a few days, awaiting a new version allowing a very comfortable setting up and ejection of the primers.


Inside  or outside shooting system with rubber bullets.
Thanks to a .22" / 6mm Flobert blank cartridge ( 22 acorn) , the bullet reachs a velocity  of   190 m- 623 fts / sec.
Rubber bullets can be used about a hundred times.

The shooting noise is comparable to a powerfull airgun noise, so it allows  to shoot without disturb the neighborhood.

It's  also possible to use those bullets with a little bit of black powder or a piece of H&C's combustible enveloppe cartridge. 

 


   Fits on :
-Uberti (but Walker et Dragoon) made  since about 1980.  (See below how to know the year of manufacture of your Italian replica)
 - Army San Marco
- Remington Pedersoli...


 

Please clic on the picture to see it in high resolution


 




Special offer:    59.00€


H&C.22'' Nipples thread : 12-28 UNF

Technical elastomer bullets .36'' cal

29,00 EUR
(-5,17%) 27,50 EUR
Détails Acheter
Technical elastomer bullets .36'' cal




50 technical elastomer projectiles that can be used at least 100 times if they are shot without powder and on a suitable surface.
At least 5000 shots!
Very many shots possible when used with a moderate powder load.
The elasticity of this technical rubber bullet and its hollow base  allow this bullet to fit  to  calibers 0.36 '' and .38 ''
                                        

                   

Clé pour cheminée H&C .22''

12,00 EUR
Détails Acheter
Clé pour cheminée H&C .22''

Pour visser et dévisser les cheminées H&C.
Pas absolument nécessaire mais tellement plus pratique qu'un tournevis !


H&C .22'' Nipple M6 x 0.75

12,00 EUR
Détails Acheter
H&C .22'' Nipple M6 x 0.75

Replacement part: 1 piece

Fits on :
-Pietta, ( Remington, Colt, Le Mat ) every years of construction. 
-Hege and  Uberti  ( but Walker et Dragoon )  made untill 1980. (See below how to know the year of manufacture of your Italian replica)
-Rogers & Spencer  made by  Euroarms et Pedersoli ...
Carefull : this nipple may not be suitable for "five shots pocket revolvers" which have sometimes too small nipple drilling !
..


H&C .22'' Nipple .12-28

12,00 EUR
Détails Acheter
H&C .22'' Nipple .12-28


Replacement part: 1 piece

Fits on:

Uberti since about  1980  ( but Walker et Dragoon )  (See below how to know the year of manufacture of your Italian replica)
Ruger Old Army .44'' (ROA)
Remington Pedersoli
Army San Marco...


6 mm blank sizer

5,00 EUR
Détails Acheter
6 mm blank sizer

Some 22''crimp blank/22'' acorn on the market are slightly larger than the standard we used for the manufacture of our H & C .22 '' nipples.  In such a case, one can use our 6mm blank sizer.

Comment déterminer l'année de fabrication d'une réplique italienne:

Détails


How to know the year of manufacture of an italian replica.


Marquage sur la carcasse de l'arme / Punch on the frame

1958 = XIV, 1959 = XV, 1960 = XVI, 1961 = XVII, 1962 = XVIII, 1963 = XIX, 1964 = XX, 1965 = XXI, 1966 = XXII

1967 = XXIII, 1968 = XXIV, 1969 = XXV, 1970 = XXVI, 1971 = XXVII - XX7, 1972 = XX8, 1973 = XX9, 1974 = XXX

1975 = AA, 1976 = AB, 1977 = AC, 1978 = AD, 1979 = AE, 1980 = AF, 1981 = AG – AH, 1982 = AI,

1983 = AJ - AK – AL, 1984 = AM, 1985 = AN, 1986 = AO – AP, 1987 = AS, 1988 = AT, 1989 = AU, 1990 = AW - AZ

1991 = BA, 1992 = BB, 1993 = BC, 1994 = BD, 1995 = BF, 1996 = BH, 1997 = BI, 1998 = BL, 1999 = BM

2000 = BN, 2001 = BP, 2002 = BS, 2003 = BT, 2004 = BU, 2005 = BZ, 2006 = CA, 2007 = CB, 2008 = CC

2009 = CD, 2010 = CF, 2011 = CH, 2012 = CI, 2013 = CL, 2014= CM, 2015= CN, 2016= CP, 2017= CS, 2018= CT,

2019= CU, 2020= CZ, 2021= DA, 2022= DB, 2023= DC, 2024= DD, 2025= DE, 2026= DF, 2027= DH, 2028= DI,

2029= DL, 2030= DM